Sea Hawk Wax “N” Grease Killer

Every new fiberglass hull is released from its mold by a mold-release wax. In order to obtain proper adhesion of paint, this wax must be removed. Apply the solvent-based Wax “N” Grease Killer to eliminate wax and contaminants to get a superior adhesion...

Sea Hawk VOC Exempt Reducer

VOC-Exempt Reducer 2053 is a premium quality solvent comparable to those used in Sea Hawk reduced VOC antifouling paints. It can be used as an additive to ease the application of solvent-based paints, or to clean painting equipment and brushes while...

Sea Hawk Tuff Stuff High-Build Epoxy Primer Low VOC

Sea Hawk Tuff Stuff High-Build Epoxy Primer

Tuff Stuff is an extremely high-build two-part epoxy primer that dries fast, enabling application of a complete barrier system and bottom paint in just two days. Using microsheet silicate technology, millions of microscopic sheets overlap and build a...

Sea Hawk Talon Semi-Hard Hybrid Ablative Antifouling

Talon is a copper-based, semi-hard hybrid ablative antifouling paint. Talon can be applied over most antifouling coatings and aggressively combats all types of fresh and salt water marine fouling. Value-priced semi-hard hybrid ablative antifouling 33...

Sea Hawk Smart Solution Copper-Free Antifouling

Smart Solution™ is the most advanced antifouling technology available today. Not only is it extremely effective, but the carbon footprint is virtually nonexistent. This new technology is combined with a pharmaceutical grade biocide, ECONEA™ (Tralopyril),...

Sea Hawk Shawkocon

SHAWKOCON is a fast-drying, general-purpose below-the-waterline anti-corrosive primer. Its physical properties and excellent adhesion characteristics provide an easy-to-use multi-functional primer Conversion/Sealer coating over Sea Hawk Biocop TBT 1200...

Sea Hawk Reducer

When temperature is below 85°, Sea Hawk’s Reducer 2033 is designed to flash quicker. This bottom paint reducer may be used in AF-33, Talon, Cukote, Tropikote, Biocop TF, and Sharkskin. Never thin bottom paint more than 10%.Sea Hawk Reducer

Sea Hawk Non-Sanding Primer

Non-Sanding Primer 1266 is designed for use on a new fiberglass hull when sanding is prohibited by manufacturer. 1266 softens existing gelcoat to create an adequate chemical bond.Sea Hawk Non-Sanding Primer

Sea Hawk Monterey Water-Based Antifouling

Monterey is Sea Hawk’s solvent-free antifouling formulation that is designed to give the best protection against all types of marine fouling, while remaining friendly to the environment. Monterey is a semi-hard, ablative finish that is easy to apply. It...

Sea Hawk Islands 44 Tf Advanced Dual-Biocide Antifouling

Islands 44 TF is an advanced tin-free self-polishing antifoulant that will keep your hull bottom smooth and free of organic growth over multiple cruising seasons. This revolutionary new coating employs dual-biocide technology via a unique controlled...

Sea Hawk Epoxy Reducer

Designed for use with Tuff Stuff, Black Barrier Coat and S-76 primers. Never thin primers more than 10%. with Sea Hawk 2044 Epoxy Reducer.Sea Hawk Epoxy Reducer

Sea Hawk Cukote Self-Polishing Copolymer Antifouling

Cukote"s high loading of cuprous oxide makes this formulation a top performer, even in the most severe fouling areas. As an ablative, self-polishing coating, there is no buildup of bottom paint over time. Your hull’s underwater surface remains smooth and...

Sea Hawk Cukote 330 Performance Antifouling With Reduced VOC

Cukote 330 Grams/Liter VOC is a top-performing antifouling coating, even in the most severe fouling areas, and preserves air quality with its Low VOC emissions during application. Its unique ablative, self-polishing properties keeps boat hull’s...

Sea Hawk Colorkote Triple-Biocide Antifoulong

Incorporating self-polishing, triple biocide, lowleaching chemistry, vibrant colors and multi-season performance, this is more than an antifouling paint. It’s hull protection done the Sea Hawk Premium Quality way. Triple Biocide Antifouling Power –...

Sea Hawk Bottom Paint Primer

This high-build, chlorinated, yellow rubber-based primer is recommended for use over old copper-based antifoulants before recoating. Provides excellent corrosion resistance over metal and fiberglass. A great insurance policy if old paint is unknown. 1277...

Sea Hawk Biocop TF Advanced Dual-Biocide For Maximum Protection

Biocop TF was developed as an alternative to tin-based antifouling paints to protect against the harshest marine environments and provide maximum protection. A new dual-biocide technology and revolutionary polymer binder system “PL3” produces an...

Sea Hawk Aluma Hawk Aluminum Boat Paint

Aluma Hawk is a quick-dry, high-solids, corrosioninhibiting coating designed for use on aluminum with no need of additional primers. Aluma Hawk is chromate-free and may be used above or below the waterline. Aluma Hawk’s unique dual purpose phenolic...

Sea Hawk AF33 Multi-Season Formula Antifouling

AF33 is a harder ablative (self-polishing) antifoulant, yielding a more durable finish on all types of vessels. With it’s premium multi-season protection at a single-season price, AF33 is the choice for discerning captains of workboats, daysailers and...

Sea Hawk Low VOC De-Waxing & Etch Cleaner #:SHK S90GL

This water-based ultra-low VOC de-wax etch and cleaner is a concentrated formula which provides deep penetrating and lifting action for removal of tough surface contaminants. With its penetrating action, it is effective on wax, oil residues, surface...

Sea Hawk Black Barrier Coal Tar #:SHK 12555GL

Provides heavy-duty protection for exposures in marine (ship hulls, tanks, pilings, etc.) petroleum, (refinery tanks, piping, offshore structures, etc.) water and water treatment. 1255 Black Barrier Coal Tar meets or exceeds all requirements of the Corp...